Engine
Disassembly and Assembly
Governor
15.
Install one lockring (32) in the groove near the
center of valve (28). Put sleeve (29), spring (broken link
spring) (30) and seat (31) in position on valve (28).
Install the other lockring (32) to hold the components in
place.
16.
Put the governor servo in position on the fuel
injection pump housing with piston (26) engaged over
rack (33). Install the bolts that hold the governor servo in
place.
NOTE: The 3306 Engine has two adjustment screws and
lock nuts.
17.
Install torque rise adjustment screw (36) in collar
(34) as shown. Install locknut (35) on the screw.
18.
Install bolt (38) in block (40) as shown. Install
spring (37) on bolt (38) as shown. Put collar (34) in
position on bolt (38) with the hole in the collar in
alignment with the notch in bolt (38). Install bolt (39) to
hold the collar in place.
26