Disassembly and Assembly
11. Remove seal ring (7) from the turbine
12. Put an alignment mark on the housing and backplate
assembly for use at assembly. Remove the bolts and
plates that hold the housing to the backplate assembly.
Remove the housing.
13. Remove bearing (8), collar (9) and the seal ring from
backplate assembly (10).
14. Remove the seal ring and bearing from the collar.
15. Remove seal ring (11) from the housing.
16. Remove the snap ring, bearing (12) and the snap
ring from each side of the housing.
Assemble Turbocharger (AiResearch
Make sure the oil passages are clean and free of all
dirt or foreign material. Put clean engine oil on all of the
parts before assembly.