Engine Disassembly and Assembly
2. Put tool (A) in position on the valve spring, and install
the locks with tool (B).
Locks can be thrown from valve when the
compressor is released if they are not in their
correct position on valve stem. Personal injury can
be the result if not carefully
3. Remove tool (A), and hit the top of valve with a
plastic hammer to be sure the locks are in their correct
position on valve.
4. Do Steps 1 through 3 again for the remainder of the
a. Install cylinder head assembly and spacer plate
b. install fuel injection nozzles
Remove And Install Valve Guides 1104-010
7S8859 Guide Driver
a. remove valves
1. Remove the valve guides from the cylinder. head
with tool (A).