Disassembly and Assembly
Install Water Pump 1361-012
Put the O-ring seal and water pump (6) in position on
the engine, and install bolts (5) to hold them.
Install the gaskets and water pump elbow (2).
Tighten clamp (3), and install switch (4) in the water
On 3306 Engines, slide the hose into position on the
water pump elbow, and install clamps (1).
Install the hose between the radiator and the water
Fill the radiator with coolant to the correct level See
the Maintenance Guide.
Disassemble Water Pump 1361-015
Bearing Pulling Attachment
Retaining Ring Pliers
remove water pump
Remove bolt (1) and the washer. Remove
(2) and gear (3) as a unit.
Use tooling (A), (C) and a press, and
bearing (2) from gear (3).
Remove snap ring (4) with tool (B).