MOUNTING FRAME -TYPE A AND B SEPARATORS (Continued).
L O C A T I O N
A C T I O N
R E M A R K S
Cleaning solvent Fed. Spec. PD-680 used to clean
parts is potentially dangerous to personnel and
Avoid repeated or prolonged skin contact.
Do not use near open flame or excessive heat.Flash
point of solvent is 100° - 138°F (38° - 59°C).
Inspect mounting frame for
cracks, distortion or broken
Repair cracks or broken
welds using approved weld-
Clean, prime and paint dis-
Attach a suitable sling around the motor and
Using a hoist, place assembled
separators into position on mounting frame.
Install, using washers (10),
bolts (9), washers (8) and
Install, using washers (4),
screws (3), washers (2) and