TM 10-4610-215-10
TM 08580A-10/1
2. REMOVE SAFETY PIN (6) AND CRANK HANDLE (7)
FROM REAR OF JACK SUPPORT BRACKET (8).
4. REPLACE CRANK HANDLE (7) ON REAR OF JACK
SUPPORT BRACKET (8); INSTALL SAFETY PIN (6).
5. TO ROTATE REAR LEVELING JACKS TO HORIZO-
TAL POSITION. PULL OUT SPRING-LOADED LOCKING
PIN (11) ON JACK SWIVEL ASSEMBLY (12); ROTATE
JACK (9) TO HORIZONTAL (STOWED) POSITION. AL-
LOW LOCKING PIN (11) TO SPRING BACK TO LOCKED
POSITION.
Figure 2-78. Preparation for Movement (Sheet 2 of 5) (Army Model No. 600-1)
2-90
3. POSITION CRANHANDLE (7) ON REAR JACK (9) AND
TURN HANDLE COUNTERCLOCKWISE TO RAISE
JACK PAD (10).
