TM 10-4610-215-10
TM 08580A-10/1
Table 2–1. Water Processing Controls and lndicators (Continued)
Key
Control or Indicator
Function
31
R.O. Pump Indicator Lamp
Green lamp comes on when R.O. pump motor is running
normally.
CAUTION
The EMERGENCY STOP switch should not be used to shut
off the ROWPU except in emergency conditions. To do so
can cause damage to the equipment.
32
Push EMERGENCY STOP
When pushed in, this switch shuts off power to all
Switch
pump motors.
33
Start Backwash Switch
Toggle switch used to start the backwash pump
motor.
34
Backwash Pump On
Blue lamp comes on when backwash pump motor is
Indicator Lamp
running normally.
35
R.O. Pump Start Switch
Toggle switch used to start, run, and stop the
R.O. pump motor.
36
Booster Pump Start Switch
Toggle switch used to start, run, and stop the
booster pump motor.
37
Chemical Feed Pump
Toggle switch used to start, run, and stop the
Start Switch
chemical feed pump motor.
38
Raw Water Pump No. 2
Toggle switch used to start, run, and stop the raw
Start Switch
water pump No. 2 motor.
39
Raw Water Pump No. 1
Toggle switch used to start, run, and stop the raw
Start Switch
water pump No. 1 motor.
40
Distribution Pump Start Switch
Toggle switch used to start, run, and stop the
distribution pump motor.
41
R.O. Pump Reset Switch
Toggle switch that resets the high- or low-pressure switch
after it shuts off the R.O. pump. If the malfunction has been
corrected, this switch will turn off the LOW PRESSURE or
HIGH PRESSURE indicator lamp.
42
R.O. Pump Jog Switch
Toggle switch that can be used to run the R.O. pump 3 to 5
seconds.
43
Panel Light Switch
Toggle switch used to turn the panel light on and off.
2-8
