TM 10-4610-215-24
TM 08580A-24/2
2-22. TRAILER LUNETTE. (Figure 2-11) (ARMY)
a. Removal. Remove nuts (1), washers (2), screws (3), and Lunette (4).
b. Installation. Position Lunette (4) in place on trailer and install screws (3), washers (2) and nuts (1).
2-23. TRAILER LEVELING JACKS. (Figure 2-1 2) (ARMY)
a. Removal.
(1) Remove spring pin housing (1) and washer (2) from swivel assembly base (3).
(2) Remove screws (4) and washers (5) attaching cap (6) to swivel assembly base (3) then remove jack
assembly (7).
b. Installation.
(1) Position jack assembly (7) in swivel assembly base (3).
(2) Position cap (6) and attach using washers (5) and screws (4).
(3) Install washer (2) and screw spring pin housing (1) into swivel assembly base (3).
Figure 2-12. Trailer Leveling Jack (ARMY)
2-33
