TM 10-4610-229-10
Table 3-1. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
33. HIGH PRESSURE PUMP ENGINE DOES NOT DEVELOP FULL POWER.
Step 1. Check throttle control linkage for correct adjustment.
If throttle is not correctly adjusted, notify your supervisor.
Step 2. Check for fuel leaks.
If there is leakage at fuel lines, notify your supervisor.
tep 3. Check fuel filter for restriction.
If fuel filter is restricted notify your supervisor.
Step 4. Check air filter for blockage.
Service air filter (para 3-6).
34. LOW OIL PRESSURE AT HIGH PRESSURE PUMP.
Step 1. Check engine oil level.
Add engine oil (table 2-1, item 39).
Step 2. Check engine oil lines for leaks.
If oil lines are leaking, notify your supervisor.
35. HIGH PRESSURE PUMP ENGINE OVERHEATS.
Step 1. Check engine oil level.
Add engine oil (table 2-1, item 39).
3-16
