TM 10-4610-232-12
3-10. REPAIR RAW WATER PUMP ASSEMBLY.This task covers replacement of connector gaskets as described in
para. 3-8.
3-11. REPAIR RAW WATER PIPING AND VALVES. This task covers replacement of connector gaskets as described
in para. 3-8.
3-12. REPAIR RAW WATER PRIME ASSIST PUMP. This task covers replacement of connector gaskets as
described in para. 3-8.
3-13. REPAIR SEPARATOR PIPING. This task covers replacement of connector gaskets as described in para. 3-8.
3-14. REPAIR SEPARATORS. This task covers replacement of connector gaskets as described in para. 3-8.
3-15. SERVICE EYEWASH STATION. This task covers:
a. Inspection.
b. Service.
INITIAL SETUP.
Materials/Parts:
General Safety Instructions:
Bacteriostatic Additive (Appx E, Sec II, Item 11)
Be careful to keep dirt and other foreign
Equipment Condition:
matter out of eyewash solution container.
Normal operation of ROWPU; no shutdown
required.
Remove dust caps (1, Figure 3-5) and push down on valve handle (2) and visually check operation. Flow should be
equal from both nozzles, Turn balancing screw (7) to adjust.
Figure 3-5. Service Eyewash Station
3-41
