TM 10-4610-232-12
c.
Remote Meters and Gages. The meters and gages not mounted on the main control panel are shown in Figure 2-5 and listed
in Table 2-4.
Figure 2-5. Remote Meters and Gages (Sheet 1 of 2)
(MODEL WTA-060 ONLY)
Table 2-4. Remote Meters and Gages
(Item numbers are keyed to Figure 2-5)
Item
Control/Indicator
Function
1
FEED WATER TEMPERATURE
This gage shows the raw water temperature and Is used to
GAGE determine the amount of drinkable water the ROWPU
should be able to produce. (Water production changes as water
temperature changes.) It is also used to show chemical cleaning
solution temperatures.
2
AIR BLANKET LEVEL
This shows the level of the air blanket in the media filter.
INDICATOR
Red flags indicate water level; white flags
indicate air level. Sensors in this level switch send electrical
signals to maintain the air level.
3
DELETED
4
CLEAN/FLUSH TANK
This sight gage shows how much water is in the
LEVEL GAGE
clean flush tank.
5
CHEMICAL TANK LEVEL
Indicate liquid level in tanks.
GAGES
6
DELETED
2-10 Change 12
