TM 10-4610-232-24P
UNIT, DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
1.
SCOPE. This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement,
and diagnostic equipment (TMDE); and other special support equipment required for performance of unit,
direct support and general support maintenance of the Water Purification Unit, Reverse Osmosis, 3,000
GPH. It authorizes the requisitioning, issue, and disposition of spares, repair parts and special tools as
indicated by the source, maintenance
and recoverability (SMR) codes.
2.
GENERAL. In addition to this section, Introduction, this Repair Parts and Special Tools List is divided into
the following sections:
a.
Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the
performance of maintenance. This list also includes parts which must be removed for replacement of
the authorized parts. Parts lists are composed of functional groups in ascending alphanumeric
sequence, with the parts in each group listed in ascending figure and item number sequence. Bulk
materials are listed in item name sequence. Items are shown in the associated illustration(s)/figure(s).
b.
Section III. Special Tools List. A list of special tools, special TMDE, and other special support
equipmentauthorizedbythisRPSTL(asindicatedbyBasisofIssue(BOI)informationinDESCRIPTION
AND USABLE ON CODE column) for the performance of maintenance.
c.
Section IV, Cross-Reference Index. A list, in National Item Identification Number (NIIN) sequence, of
all National stock numbered items appearing in the listing, followed by a list in alphanumeric sequence
of all part numbers appearing in the listings. National stock numbers and part numbers are cross
referenced to each illustration figure and item number appearance. The figure and item number index
lists figure and item numbers in alphanumeric sequence and cross references NSN, CAGEC and part
number.
3.
EXPLANATION OF COLUMNS (SECTIONS II AND Ill).
a.
ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
b.
SMR Code (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position
code containingsupply/requisitioning information, maintenance category authorization criteria, and
disposition instruction, as shown in the following breakout:
Source Code
Maintenance Code
Recoverability Code
XX
XX
X
How you get an item.
3rd position
4th position
* Complete Repair: Maintenance capacity, capability, and authority to perform all corrective maintenance tasks
of the “Repair” function in a use/user environment in order to restore serviceability to a failed item.
1
1st two
positions
Who determines
disposition action on an
unserviceable item.
Who can install,
replace or use the
item
Who can do
complete repair on
the item.
