TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
Section IV. UNIT TROUBLESHOOTING
2-8. INTRODUCTION.
This section provides the troubleshooting information for the ROWPU at the Unit Maintenance level It consists of the
symptom index, listing the most common malfunction symptoms, and the troubleshooting table, Table 2-2. This table
repeats the malfunctions, and provides the procedural steps and corrective actions necessary to return the system to
operational readiness
2-9. TROUBLESHOOTING.
a. Use of Tables To use this information in the most effective manner the following general procedure should be
followed.
(1) If possible, talk to the operator to find out the symptoms and any corrective action that may have been
taken
(2) Go to the Symptom Index and find the entry that describes your problem
(3) Go to the page to which the index sends you
(4) Read the Warnings, Notes and Cautions
(5) Perform the steps in the order provided in the table
(6) When you have found the problem, perform the indicated corrective action
b. Limitations. In troubleshooting tables like this, it is impractical to list every possible malfunction or to include
every possible step or corrective action If the malfunction you are experiencing is not listed, or if the procedure given
does not isolate the problem, you should consult with your supervisor.
2-11
