TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
2-16. CABLE ASSEMBLY MAINTENANCE - continued..
INSTALLATION
a
Position gasket (20) and conduit box (4) on motor (1) and install two screws (3).
b
Insert wires of cable assembly (15) through hole in conduit box (4) and tighten sealing grip (16).
c.
Position wires out of conduit box (4).
NOTE
Install wires by set as tagged.
d.
On each set of three wire lugs (8), install screw (6), flat washer (7), lockwasher (9), and nut (13).
e
Using electrical tape (5), wrap each wire set (19) separately.
f
Secure ends of electrical tape (5) with twine (14).
g
Position bundle of four wire sets (19) in conduit box (4).
h
Install ground wire lug (18) with screw (17).
l
Install gasket (10), conduit box cover (11), and four screws (12).
j
Wind cable assembly (15) onto backwash pump assembly frame (2).
k.
Start backwash pump and check for proper operation (TM 10-4610-240-10).
2-92
112
