TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
2-86. LIGHT ASSEMBLY (PANEL) MAINTENANCE - continued.
c.
Inspection.
(1)
Inspect splice box (6), adapter ring (11), and fixture body (19) for damage.
(2)
Inspect socket (16) for cracks in ceramic holder and corrosion on contacts. Clean contacts with
sandpaper if required.
(3)
Inspect globe (8) and bulb (7) for cracks.
(4)
Inspect gaskets (18, 20,and 21) for cracks or tears.
d.
Repair.
Replace defective components.
e.
Assembly.
(1)
Position gasket and adapter plate on splice box and install two screws.
NOTE
Wiring must run through center of splice box, gasket, adapter plate, gasket, fixture body and
gasket.
(2)
Position wiring (17) through center of light assembly components Connect terminals (14) to socket (16)
with two screws (13) as tagged.
(3)
Position gasket (20), fixture body (19), gasket (18) and socket (16) on adapter plate (11) and install two
screws (15).
(4)
Position splice box (6) and attached parts on panel light bracket (2). Install two screws (1), flat
INSTALLATION
a.
Install light bulb (7) in socket (16).
b
Install globe (8) on fixture body (19).
c.
Install guard (10) on fixture body (19) and tighten setscrew (9).
d
Push panel light bracket (2) into control panel (22), and tighten four bolts (23).
2-320