TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
2-89.
FLATBED CARGO TRAILER MAINTENANCE (MODEL WPES-1).
This task consists of
a. Removal
b. Installation
INITIAL SET-UP:
Tools required
General Mechanics Tool Kit (Appendix B, Section III, Item 4)
1-1/8 Inch Wrench (Appendix B, Section III, Item 3)
Vice (Appendix B, Section III, Item 3)
Material /Parts Required
Drive Screw (A/R) - MS21318-57
Lockwasher (6) - MS35338-51
Lockwasher (4) - MS35338-33
Equipment Condition
Reference
ROWPU shutdown (TM 10-4610-240-10).
Power shutdown (power source manual).
Trailer disconnected from towing vehicle (TM 10-4610-240-10).
Personnel Required
Two (2)
General Safety Instructions
WARNING
Lunette is heavy/difficult to handle.
REPLACE REFLECTORS
NOTE
There are eight reflectors on the trailer, one is shown the others are similar.
a.
Removal.
(1)
Remove two screws (4) and ring (3) from reflector (2).
(2)
Remove reflector (2) and gasket (1) from frame (5).
b.
Installation
(1)
Position gasket (1) and reflector (2) on frame (5).
(2)
Install ring (3) and two screws (4) on reflector (2).
REPLACE LUNETTE
a.
Removal.
(1)
Using 1-1/8 inch wrench, remove six nuts (9), lockwashers (8), bolts (6).
2-330
