TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
Table 3-1. Direct Support Troubleshooting - continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
BACKWASH PUMP ASSEMBLY - continued
a. If continuity is absent through heater assembly, replace heaters (refer to paragraph 3-49) and reset heater
assembly.
b. If continuity is absent through CB2 (CB2 ON), replace CB2. Refer to paragraph 3-49.
c. If continuity is absent through K2 (see above note), replace motor starter Refer to paragraph 3-49.
d. If continuity is absent through wires, tighten connections and/or replace defective wire.
3-63
