TM 10-4610-240-24
TM 08580C-24/2
TO 40W4- 13-22
3-4.
CABLE ASSEMBLY (BACKWASH PUMP) MAINTENANCE.
This task consists of:
a. Inspection
b. Disassembly
c. Repair
d. Assembly
e. Test
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit (Appendix B, Section III, Item 4).
Soldering Gun Kit (Appendix B, Section III, Item 3).
Multimeter (Appendix B, Section III, Item 3)
Electrical Repair Kit (Appendix B, Section III, Item 3).
Crimping Tool (Appendix B, Section III, Item 3).
Wire Stripper (Appendix B, Section III, Item 3).
Materials/Parts Required
Tape Electrical (Appendix C, Section II, Item 31).
Solder (Appendix C, Section II, Item 27).
Equipment Condition
Reference
Cable assembly removed (para. 2-16).
INSPECTION.
For inspection procedures, refer to paragraph 3-23.
DISASSEMBLY.
For disassembly procedures, refer to paragraph 3-23.
TEST.
For test procedures, refer to paragraph 3-23.
ASSEMBLY.
For assembly procedures, refer to paragraph 323.
REPAIR.
For repair procedures, refer to paragraph 3-23.
3-76
