TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
3-20.
ELECTRICAL INSTALLATION MAINTENANCE- continued.
INSPECTION
a.
Inspect cable assemblies for cracked or, cut, wires Tag damaged wires.
b.
Inspect receptacle connectors for good connection. Tag damaged wires.
c.
Check for continuity on all wires Tag faulty wires.
NOTE
Procedures are typical and can be used for all cable assemblies in the ROWPU.
Refer to wiring diagram in Appendix F for cable assembly being repaired.
DISASSEMBLY
a.
Lay out cable assembly on a flat surface.
NOTE
Tag all wires before removal.
b.
Loosen two screws (3) securing clamp (5) to wiring harness (4).
c.
Unscrew coupling (6) from shell (8) and slide coupling (6) and insulator bushing (2) clear of shell
(8).
d.
3-135
