TM 10-4610-240-24
TM 08580C-24/2
TO 40W4-13-22
3-52.
WIRING HARNESS W5 (GENERATOR) MAINTENANCE (MODEL WPES-1).
This task consists of:
a. Removal
b. Inspection
c. Test
d. Disassembly
e. Assembly
f. Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit (Appendix B, Section III, Item 4).
Soldering Gun Kit (Appendix B, Section III, Item 3).
Multimeter (Appendix B, Section III, Item 3).
Electrical Repair Kit (Appendix B, Section III, Item 3).
Crimping Tool (Appendix B, Section III, Item 3).
Wire Stripper (Appendix B, Section III, Item 3).
Material/Parts Required
Tape Electrical (Appendix C, Section II, Item 31).
Solder (Appendix C, Section II Item 27).
Equipment Condition
Reference
ROWPU shutdown (TM 104610-240-10).
REMOVAL
For removal procedures, refer to paragraph 3-46.
INSPECTION
For inspection procedures, refer to paragraph 3-46.
TEST
For test procedures, refer to paragraph 3-46.
DISASSEMBLY
For disassembly procedures, refer to paragraph 3-46.
ASSEMBLY
For assembly procedures, refer to paragraph 3-46.
INSTALLATION
For installation procedures, refer to paragraph 3-46.
3-294
