TM 10410-240-24
TM 08580C-24/2
TO 40W4-13-22
3-59. MOTOR STARTERS.
This task consists of:
a.
Removal
b.
Disassembly
c.
Cleaning
d.
Inspection
e.
Assembly
f.
Test
g.
Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit (Appendix B, Section III, Item 4).
Soldering Gun Kit (Appendix B, Section III, Item 3).
Multimeter (Appendix B, Section III, Item 3)
Electrical Repair Kit (Appendix B, Section III, Item 3).
Crimping Tool (Appendix B, Section III, Item 3).
Wire Stripper (Appendix B, Section III, Item 3)
Material/Parts
Solder (Appendix C, Section II, Item 27)
Solvent, drycleaning (Appendix C, Section II, Item 28).
Tape, Electrical (Appendix C, Section II, Item 31)
Lockwasher (A/R) - MS35338-139
Personnel Required
Two (2)
Equipment Condition
Reference
ROWPU shutdown (TM 10-4610-240-10).
General Safety Instructions
WARNING
High voltage can cause burns and electrical shock.
Using drycleaning solvent incorrectly can cause injury or even death.
Burned out overload relay may cause fire or electrical shock.
WARNING
High voltages in this equipment can cause serious injury or death. Be certain that all power is
removed before performing maintenance.
REMOVAL
K1 and K2.
a.
Turn 13 rotary fasteners (1) and lower junction box cover (2).
3-308
