TM 10-4610-241-10
TO 40W4-13-41
2-7. ROWPU ASSEMBLY AND PREPARATION FOR USE - cont.
V.
Connect Power Source to ROWPU. Refer to Figure 2-44.
(1)
(Models WPES-20 and H-9518-2) Remove cover from power receptacles J1 and J10 on bottom of junction
box. Connect two power cables from power source to receptacles J1 and J10.
(2)
(Model WPES-30 and H-9518-3) Remove cover from power receptacle J1 on bottom of junction box.
Connect power cable from power source to receptacle J1.
Figure 2-44. Power Cable Connection.
C h a n g e 2 2 - 7 9
