TM 10-4610-241-24
T O 4 0 W 4 - 1 3 - 4 2
2-38. BALL VALVES (VENT VALVES) REPLACE.
(7)
(8)
(9)
(10)
Mark position of elbows in relation to valves on valves and remove three elbows (17, 18,
and 19) from three valves (10, 11 and 12).
Remove three valves (10, 11, and 12) from nipples (20, 21, and 22).
Remove three nipples (20, 21, and 22) from tees (23 and 24) and elbow (25).
If required, refer to Paragraph 2-30 for further disassembly of piping.
2
4
NOTE
Tee (24) and corresponding hardware are
not on Models H-9518-1, H-9518-2, and
H-9518-3.
VIEW FROM BACK OF CONTROL PANEL
C h a n g e 1 2 - 1 6 5
