TM 10-4610-241-24
TO 40W4-13-42
Table 3-1. Direct Support Troubleshooting-continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
DISTRIBUTION PUMP ASSEMBLY- continued
d.
If continuity is absent through cable assembly, W52 repair cable assembly. Refer to Paragraph 3-27.
e.
If continuity does not exist through K6 contacts (2-3) and/or 450/600 Ohms is measured from A2-A1,
replace motor starter. Refer to Paragraph 3-61.
f.
If continuity is absent in wiring, tighten loose connections and/or replace defective wire.
Change 1 3-29
