TM 10-4610-241-24
TO 40W4-13-42
3-47.
TIMER REPAIR (MODELS WPES-10, WPES-20 AND WPES-30) - continued.
f.
Assembly.
(1)
Position latches ( 18) in place on timer (14) and install four screws (17), lockwashers ( 16) and nuts ( 15).
(2)
Position gasket (12) and stager ( 11) in cutout on timer ( 14) and install four lockwashers ( 10) and screws
(9).
NOTE
Be sure to connect stager wires as tagged. If tags are lost or illegible use color code as
follows to connect stager wires to contacts of terminal board ( 13):
CONTACT
WIRE COLOR
6
Blue
8
Orange
10
Black
CONTACT
WIRE COLOR
7
Purple
9
Red
11
White
(3)
Connect six wires of stager to terminal board (13) as tagged or use color code.
(4)
Position information plate (8) and terminal board (7) and install two screws (6).
NOTE
Be sure to connect wiring harness as tagged. If tags are lost or illegible use color code as
follows to connect wires to contacts of terminal boards (13 and 7):
TB (13) CONTACT
WIRE COLOR
TB (7) CONTACT
2
Yellow
4
5
Red
5
12
White
2
13
Black
1
14
Green
3
(5)
Install wiring harness (5) as tagged. If tags are lost or illegible use color code to connect to terminal boards
(7 and 13).
(6)
Install screen (4), adapters (3), plugs (2) and elbows (1) on stager (12) as marked during disassembly.
3-270 Change 1
