TM 10-4610-241-24
TO 40W4-13-42
3-47.1 TIMER REPAIR (MODELS H-9518-1, H-9518-2, H-9518-30 - continued.
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
Install back panel (15) and secure with screws (13) and lockwashers (14).
Install cover lights (12) and secure with lockwasher (17) and nut (16).
Solder wires to cover lights and connect the cover light wires to terminal assembly (8) following tags.
Install stager (7) and secure with screws (9), flat washers (10) and lock nuts (11).
Connect stager wires to terminal assembly (8) following tags.
Install inlet strainer (4) 90 Deg connector (3), plug (5) and five connectors (6) on stager (7) as marked during
disassembly.
Ensure stager indicates “3” on right side at red index mark. If not, rotate cam in direction of arrow until it
seats in position “3”.
Install timer according to Paragraph 2-68.1.
Close cover and secure with four screws (2).
Operate ROWPU according to TM 10-4610-241-10.
3-272.4 Change 1
