TM 10-4610-241-24
TO 40W4-13-42
3.69 TRUNNION REPLACE - (MODELS WPES-10 AND H-9518-1).
This task consists of
a. Removal
b. Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit (Appendix B, Section III, Item 4).
Two Hydraulic or Screw-Type Jacks (Appendix B, Section III, Item 3).
Jack Stands (Appendix B, Section III, Item 3).
Material/Parts Required
Lockwashers (TM 10-4610-241-24P)
Personnel Required
Two
Equipment Condition
Both Hub and Drum Assemblies removed from Axle (Paragraph 2-87).
Both Air Chambers removed from Axle (Paragraph 2-89).
General Safety Requirements
WARNING
Lifting heavy equipment incorrectly can cause serious injury. See general warning page.
3-376
Change 1
