TM 10-6630-222-12&P
0022 00
OPERATOR AND UNIT MAINTENANCE MANUAL
(INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
FOR WATER QUALITY ANALYSIS SET: PURIFICATION (WQAS-P)
REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) INTRODUCTION
SPECIAL INFORMATION.
USABLE ON CODE. The Usable On Code appears in the lower left corner of the description column heading. Usable On
Codes are shown as "UOC: ..." in the Description Column (justified left) on the last line applicable item
description/nomenclature. Uncoded items are applicable to all models.
ASSOCIATED PUBLICATIONS. See References.
HOW TO LOCATE REPAIR PARTS.
1. When NSNs or P/Ns Are Not Known.
First. Using the table of contents, determine the assembly group to which the item belongs. This is necessary since figures
are prepared for assembly groups and subassembly groups, and lists are divided into the same groups.
Second. Find the figure covering the functional group or the subfunctional group to which the item belongs.
Third. Identify the item on the figure and note the number(s).
Fourth. Look in the repair parts list work packages for the figure and item numbers. The NSNs and part numbers are on the
same line as the associated item numbers.
2. When NSN Is Known.
First. If you have the NSN, look in the STOCK NUMBER column of the NSN index work package. The NSN is arranged
in NIIN sequence. Note the figure and item number next to the NSN.
Second. Turn to the figure and locate the item number. Verify that the item is the one you are looking for.
3. When P/N Is Known.
First. If you have the P/N and not the NSN, look in the PART NUMBER column of the P/N index work package. Identify
the figure and item number.
Second. Look up the item on the figure in the applicable repair parts list work package."
NOTE: Include 4 only if the RPSTL has a reference designator index work package.
4. When Reference Designator Is Known.
First. If you know the reference designator, look in the REFERENCE DESIGNATOR column of the reference designator
index work package. Note the figure and item number.
Second. Turn to the figure and locate the item number. Verify that the item is the one you are looking for.
ABBREVIATIONS.
Abbreviations used in this manual are listed in MIL-STD-12. See glossary for unique abbreviations
END OF WORK PACKAGE
0022 00-6
