TM 10-6630-245-13&P
2.6.5. Chloride Test Kit. High Range.
a.
The Chloride Test Kit, High Range is used for
the following test:
TEST
RANGE
b.
The kit components and their use are:
(1)
Chloride Titrant (Silver Nitrate): Titrant
reagent for the chloride test.
(2)
Test Tube: Plastic measuring tube used
to collect measured water sample.
(3)
Chloride 2 Indicator Powder Pillows:
Used to treat water sample before
titration.
(4)
Mixing Bottle: Used to hold water sample
for mixing and titration.
2.6.6. Dissolved Oxygen Test Kit.
a.
The Dissolved Oxygen Test Kit is used for the
following test:
TEST
RANGE
Dissolved oxygen
0.2 mg/l and above
b.
The kit components and their use are:
(1)
Sample Bottle: An empty bottle holding
approximately 60 mil. Used to collect
water samples.
(2)
Sulfuric Acid Reagent(l: 1): Reagent
used as part of sample treatment to fix
oxygen in sample.
(3)
Titration Flask, 50ml, with Stopper: Used
to hold the water sample while titrating.
(4)
Sodium Thiosulfate Solution: Titrant
reagent for the dissolved oxygen test.
(5)
Manganese Sulfate Reagent: Reagent
used as part of sample treatment to fix
oxygen in sample.
(6)
Mini Burette: A tube and plunger device
used to deliver measured amounts of
titrant.
(7)
Starch Reagent Solution: Reagent used
as end-point indicator in titration.
(8)
Dropping Pipet, 1.0 ml: A rubber-bulb
eyedropper-like pipet used to transfer
manganese sulfate solution and alkaline
potassium iodide solution when fixing
oxygen in a water sample.
(9)
Dropping Pipet, 0.5 ml: A rubber-bulb
eyedropper-like pipet used to measure
and transfer sulfuric acid solution when
fixing oxygen in a water sample.
(10)
Alkaline
Potassium
Iodide
Solution:
Reagent used as part of sample treatment
to fix oxygen in sample.
Figure 2-9. Chloride Test Kit, High Range.
Figure 2-10. Dissolved Oxygen Test Kit.
2-25
