TM 3-4230-204-12&P
APPENDIX F
UNIT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST
Section I. INTRODUCTION
F-1.
SCOPE. This RPSTL lists and authorizes spares and repair parts; special tools; special test, measurement, and diagnostic equipment (TMDE); and other
special support equipment required for performance of unit maintenance of the M11 Decontaminating Apparatus. It authorizes the requisitioning, issue, and
disposition of spares, repair parts and special tools indicated by the Source, Maintenance and Recoverability (SMR) codes.
F-2.
GENERAL. In addition to Section I, Introduction, this Repair Parts and Special Tools List is divided into the following sections:
a. Section II. Repair Parts List. A list of spares and repair parts authorized by this RPSTL for use in the performance of maintenance. The list also includes
parts which must be removed for replacement of the authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with
the parts in each group listed in ascending figure and item number sequence. See MIL-STD-335, p 24 (C-1). Bulk materials are listed by item name sequence.
Repair parts kits are listed separately in their own functional group within section II. Repair parts for repairable special tools are also listed in this section. Items
listed are shown on the associated illustration(s)/figure(s).
b. Section IlI. Special Tools List. Not applicable.
c. Section IV. National Stock Number and Part Number Index. A list, in National item identification number (NIIN) sequence, of all National stock numbered
itemsappearing in the listing, followed by a list in alphanumeric sequence of all part numbers appearing in the listings. National stock numbers and part numbers
arecross-referenced to each illustration figure and item number appearance.
F-3.
EXPLANATION OF COLUMNS (SECTIONS II AND III).
a. ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
b. SMR CODE (Column (2)). The Source, Maintenance, and Recoverability (SMR) code is a 5-position code containing supply/requisitioning information,
maintenance level authorization criteria, and disposition instruction, as shown in the following breakout:
F-1
