TM 3-4230-218-12&P
4-17.
BURNER - Continued.
a.
Removal.
(1) Remove spark plug.
(2) Tag and disconnect fuel lines (1 and 2) from burner (8).
(3) Disconnect ignition wire (9) form spark plug (10).
(4) Disconnect burner choke cable
(5) Remove eight bolts (12), eight
washers (14).
NOTE
Igniter does not have to be removed unless
4-32.)
(6) from burner (8).
lockwashers (13), and eight
it is defective.
( R e f e r t o p a g e
(6) Remove burner (8) from heat exchanger (15).
(7) To remove igniter wires from control panel refer to page 4-35.
The igniter can be disconnected from control panel by discon-
necting white wire from No. 7 terminal and green/yellow wire
from No. 12 terminal on terminal strip.
(8) Remove two bolts (3) and two washers (4) and igniter (5).
4-30
