TM 3-4230-218-12&P
4-28.
SUCTION HOSE/STRAINER ASSEMBLY.
This task consists of:
a.
Repair
b.
Replace
INITIAL SETUP:
Tools Required:
Tool Kit, General Mechanics
Equipment Conditions:
Hoses removed.
a.
Suction Hose Repair.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
Remove gasket (5) from coupling (4).
Loosen nut (3) and bolt (6) and then remove coupling (4) from
hose (l).
Remove clamp (2).
Loosen nut (10) and bolt (8) and remove strainer (7).
Remove clamp (9).
Replace defective or damaged parts as required.
Install clamp (9) over hose (l).
Install strainer (7) and tighten nut (10) and bolt (8) on clamp
(9).
Install clamp (2) on hose (l).
Install coupling (4) and tighten nut (3) and bolt (6) on clamp
(2).
Install gasket (5) in coupling (4).
4-60
