TM 3-4230-218-12&P
2-9.
PREPARATION FOR MOVEMENT - Continued.
f.
Engine Fuel Can Removal.
(1)
(2)
(3)
(4)
Disconnect engine fuel can lid assembly (1) from engine fuel
can (2).
Remove engine fuel can (2) from system and place on ground,
letting end of hose drain into can. Pump ball pump to drain
fuel from hose. Install cap on fuel can and place lid assembly
in tray.
Restart engine and set throttle to idle. Engine will stop when
carburetor and fuel lines are drained of fuel.
Store fuel can lid assembly (1) in tool box (3).
2-34