TM 3-4230-218-30&P
(10) Burner Fuel Valve Replacement.
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
(l)
Remove inlet panel.
Loosen packing nut (41).
Unscrew and remove stem (42).
Remove nut (40), lockwasher (43), and washer (39).
Slide the valve (35) out rear of panel (8). Remove washer
(37).
Disconnect hose assembly (45) and remove adapter (34).
Remove valve (35) from check valve (36).
Remove check valve (36) and adapter (46) from hose (47).
Apply locking compound (item 2, Appendix C) on all
threads.
Assemble adapter (34), valve (35), check valve
(36), and adapter (46).
Connect hose (47) to adapter (46), and hose (45) to
adapter (34).
Install valve (35) and washer (37) onto rear of panel (8).
Install washer (43), washer (39), and nut (40).
Install stem (42) and tighten packing nut (41).
2-73
