TM 5-4610-218-12
f. Inspect door hinge and latch assembly for free
f. Inspect door hinge and latch assembly for free
operation.
operation.
g. Inspect seals and rubber stripping for cracks
g. Inspect seals and rubber stripping for cracks
and signs of deterioration.
and signs of deterioration.
3-18. Van Body Right Side and Rear Door.
3-17. Van Body Left Bottom Side Door and
Counter-Balance Assembly.
Clean and inspect the van body right side and
rear door.
Clean and inspect the van body left top side
door and counter-balance assembly.
a. Clean all metal parts with dry cleaning sol-
vent P-D-680.
a. Clean all metal parts with dry cleaning sol-
vent P-D-680.
WARNING
WARNING
Dry cleaning solvent, P-D-680, used to
clean parts, is potentially dangerous.
Dry cleaning solvent, P-D-W, used to
A v o i d repeated and prolonged
clean parts, is potentially dangerous.
breathing of the vapors and skin con-
A v o i d repeated and prolonged
tact with the liquid. Do not use near
breathing of the vapors and skin con-
open flame or excessive heat. Use in a
tact with the liquid. Do not use near
well-ventilated area. The flash-point
open flame or excessive heat. Use in a
of P-D-680 is 100-138 F (38-59C).
well-ventilated area. The flash-point
of P-D-680 is 100-138 F (38-59 C).
b. Clean rubber parts with soap and water.
b. Clean all seals and rubber stripping in a non-
c. Inspect all threaded parts for damaged
mineral base cleaning solvent or soap and water.
threads.
c. Inspect all threaded parts for damaged
d. Inspect the rubber seals for cracks, and signs
threads.
of deterioration.
d. Inspect the door for dents and misalignment.
e. Inspect the door hinges and latches for bind-
ing.
e. Inspect door window glass, blackout panel, and
guides for damage.
f. Inspect the doors for dents, cracks, misal-
ignment, and other damage.
3-51
