TM 5-4610-233-13&P
INSPECT
a. Inspect tubing for cuts, crooking, and splitting. Replace as required.
b. Inspect hose clamp for cracks and corrosion. Replace as required.
c. Inspect hose connectors, street elbow, and pipe nipple for damaged threads. Replace as required.
d. Inspect strainer for damaged threads and wire mesh. Replace as required.
INSTALL
NOTE
Apply Antiseize tape to all metal to metal pipe connections.
a. Install pipe nipple (6), strainer (5), street elbow (4), and two hose connectors (3).
b. Install tubing (2) and two hose clamps (1).
c. Tighten two hose clamps (1).
END OF TASK
4-14. REPAIR INLET HOSE ASSEMBLY. Repair of the inlet hose assembly is limited to replacement of
components. For procedure to replace inlet hose assembly components, see Replace Inlet Hose Assembly,
paragraph 4-13.
4-16
Change 2