WARNING
TM 5-6630-215-12
Keep all bottles tightly capped.
Do not allow
reagent chemicals to come in contact with the skin
or eyes.
Do not ingest.
Most chemical reagents
are either corrosive or poisonous or both.
Chloride Titrant.
Poison, may be fatal if
swallowed.
May cause permanent blindness.
Cannot be made nonpoisonous.
For test purposes
only.
Contains silver nitrate and methanol.
Avoid contact with skin and eyes.
Keep well
closed in cool place.
External contact:
Flush
with Water.
Ingestion:
Induce vomiting by
giving a tablespoon of salt in a glass of warm
water.
Call physician immediately.
Keep away
from children.
Chlorde Indicator.
For test purposes only.
Not
for internal use.
Keep away from children.
(2) Chloride Test - 0 -1500 mg/l Range.
(a) Fill the plastic measuring tube level with the water
sample and pour it into the mixing bottle.
(b) Add the contents of one chloride indicator powder pillow.
Swirl to mix.
(c) Add the chloride titrant dropwise (counting the number of
drops) until the solution changes to an orange color.
Be sure to mix
thoroughly after each drop and to hold the dropper verically.
(d) The chloride content of the test water in mg chloride/l is
found by multiplying the number of drops added by 30.3.
NOTE
To extend the range of the test, a sample dilution
is necessay (para 2-10a, table 2-1).
(3) Chloride Test - 0-500 mg/l Range.
(a) Fill the mixing bottle to the 23 ml mark with the water
sample.
(b) Add the contents of one chloride indicator powder pillow.
Swirl to mix.
(c) Add the chloride titrant dropwise (counting the number of
drops) until the solution changes to an orange color.
Be sure to mix
thoroughly after each drop and to hold the dropper verically.
2-59
