TM 5-6630-215-12
CHAPTER 3
OPERATOR MAINTENANCE INSTRUCTIONS
This chapter contains Lubrication,
Preventive Maintenance Checks
and Services (PMCS) and troubleshooting producers that must be accom-
plished by the operator.
Section I.
LUBRICATION
Page
General
3-1
Instructions
3-1
3-1.
GENERAL.
a.
Instructions.
There are essentially no working wear parts
incorporated in the Water Quality Analysis Sets.
Cover hinges,
latches and similar minor items should be given a minimum application
of graphite,
dry silicone or similar lubricant material.
Oils and
greases should be avoided;
if used to prevent corrision - apply
sparingly.
b.
(DELETED)
Section II.
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
Page
General
Item Number Column
Interval Columns
Item to be Insepcted Column
For Readiness Reporting, Equipment is
Not Ready/Available if:
Column
Checks With Assistance
General
Instrument Linearity Check
Instrument Wavelength Accuracy Check
3-2
3-2.
GENERAL
3-1
3-2
3-2
3-2
3-12
3-12
3-12
3-12
To insure that the Water Quality analysis Set is ready for oper-
ation at all times,
it must be inspected systematically so that the
defects may be discovered and corrected before they result in serious
damage or failure.
Defects discovered during operation of the unit
Change 1
3-1
