TM 5-6630-215-12
(5) Zinc test kit.
(6) Multipurpose test spectrophotometer.
(7) Supporting lab-ware and reagents.
c.
WQAS - Engineer.
This set is designed to provide immediate
information concerning the presence of chemical contamination of water
in order to determine the type of purification equipment required and
to monitor the equipment when installed.
Its main components are:
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
Turbidity test kit.
Low-range chloride test kit.
Sulfate test kit.
Hardness test kit.
Alkalinity test kit.
Color test kit.
pH and residual chlorine test kit.
Conductivity meter.
Water testing kit of chemical agents -AN- M2.
(Supplied in
buys 1 and 2 only.)
Refill kit, chemical detector, VG, ABC-M30.
(Supplied in
buys 1 and 2 only.)
Supporting lab-ware and reagents.
Water testing kit, chemical agents - M272.
(Not supplied in
buys 1 and 2.)
d.
(DELETED)
1-7.
TABULATED DATA.
a.
Identification, Warning Labels and Instruction Plates. The contents
are covered in the operating instructions in Chapter 2. It should be noted
that when test instructions cannot be affixed to the inside cover, they will be
positioned nearby.
Each chemical container has warning and identification labels
attached directly on the container.
First aid and antidote information is
contained in the warning label when necessary.
The location of labels and in-
structions are listed in table 1-1 below.
b.
Weight.
The WQAS (preventive medicine) and the WQAS (engineer) are
proportioned so as to weigh less than 65 pounds each. Each set may be
carried by one man.
Change 1
1-6.1/(1-6.2 Blank)
