TM 55-1930-209-14&P-1 Table 8-1.  Equipment Monitoring System Main Components Component Quantity Function Location Main processor 1 Receives and processes data from ROWPU space, sensors and keyboard, displays data forward bulkhead on video monitor and activates two strobe lights, two horns and buzzer Keyboard 1 Selects page for viewing on video ROWPU space, monitor, acknowledges alarms, in forward bulkhead edit mode sets time and data, under video monitor activates/deactivates sensors and sets alarm and reference points Video monitor 1 Displays data processed by main ROWPU space, processor in display page formats forward bulkhead above keyboard Alarm relay 1 Activates alarms in ROWPU ROWPU space space and dayroom on signal under keyboard from main processor Bilge alarm 1 Activates alarms on deckhouse ROWPU space, module top on signal from bilge sensors outboard of main processor Horn 2 Sounds warning to crew in One on mast on ROWPU space and weatherdecks deckhouse top, that an abnormal condition exists one in ROWPU space on forward bulkhead (Barge 1) and on overhead (Barges 2 and 3) Strobe light 2 Flashes warning to crew that an One with each abnormal condition exists horn Buzzer 1 Sounds warning to crew in Dayroom, aft dayroom that abnormal condition bulkhead exists 12-volt gel cell 2 Connected in series, provides ROWPU space, battery 24 Vdc power to EMS under main processor Battery charger 1 Maintains batteries at full charge ROWPU space, under main processor Main power 1 Maintains batteries at full charge. ROWPU space, switch Provides or disconnects power to near main monitoring system from batteries processor ________________________________________ 8-2