CHANGE GEARS
GEARCASE
LETTER
35-300-0-18
B
1st. Intermediate pin.shaft 27 teeth
120.00
35-300-0-17
C
1st. Intermediate pin.shaft 24 teeth
120.00
35-300-0-14
F
1st. Intermediate pin. shaft 18 teeth
120.00
35-300-0-31
G
1st. Intermediate pin.shaft 14 teeth
120.00
35-300-0-23
B
2nd. Intermediate Shaft gear 45 teeth
120.00
35-300-0-22
C
2nd. Intermediate Shaft gear 48 teeth
120.00
35-300-0-20
F
2nd. Intermediate Shaft Gear 54 teeth
120.00
35-300-0-31
G
2nd. Intermediate Shaft Gear 58 teeth
120.00
NOTE:
Ratios formally available with "D" & "E" reductions can be obtained by using the "B"
reduction & proper motor RPM's.
Contact factory if "A" reduction must be used.
RP-35.1A
7/1/85 WG-1143
