LUBRICATION
LUBRICANT
LOCATION
INSTRUCTIONS
NLGI No 2 Grease
Fittings on chain sheave pins
Annually or as required
(roller bearing)
* Trolley wheels
After prolonged use or at
reassembly
Pawl Stud
Coat lightly at reassembly
Brake square thread
Coat lightly at reassembly
NLGI No 2 with E.P additive
Gears
After prolonged use or at
reassembly
Intermediate oils preferably
Chain
Immerse in container or swab
with E.P additives
with oil soaked rag Wipe off
excess oil Should maintain
.
chain rust free
Bonded lubricants (similar to
Chain
Use in place of oil, if oil residues
Dow Molykote M-88
are objectionable
*Not required on units equipped with sealed ball bearings(Wheels will not have grease fittings.)
CHESTER HOIST DIVISION * MONOGRAM INDUSTRIES * PHONE (216) 424-7248 * LISBON, OHIO, U.S.A. 44432
9
