To lower the temperature turn knob to cooler position which will lower the cut off point only. When control is properly set
defrost will be automatic.
On freezers, back pressure controls, when furnished, are set to 0 p.s.i. cut out and 10 p.s.i. cut in. These control settings
will result in an average temperature of 0F.
PRODUCT LOADING
Always pack product in refrigerators and freezers so that the air flow is not impeded. The refrigeration of your products
depends upon its contact with circulating air. Consequently, great care should be taken not to restrict its flow.
WARRANTY:
All parts of your refrigerator or freezer are covered by a one-year warranty, which is on file at our office. It is not
necessary to notify us in any way to validate your warranty.
The Bailey Distributors, Inc. warranty covers only the replacement on parts in exchange for defective parts, F.O.B.
Brooklyn, N.Y. (factory). These parts must be returned to our plant, freight prepaid, to determine whether or not the failure
was due to defects in material or workmanship.
This warranty is limited to the furnishing of replacement parts only and under no circumstances will a cash or credit
reimbursement be issued. Charges for labor or service cannot be made under the terms of this warranty.
When ordering replacement parts, always refer to the model and serial numbers of the cabinet.
