B) remove the capillary line from the "T" connection
located in the high pressure control fitting on
the compressor. The valve is now removable.
C) Condenser - To remove the condenser, unbraze the
water inlet line from the ships piping. Remove the
refrigeration line going to the receiver by unbrazing
it at condenser. Remove the discharge line going to
the compressor by unbrazing it at condenser. Remove
the four (4) nuts and washers holding down the con-
denser to the NAC-600 base. The condenser is now
removable.
D) Receiver - Unbraze the two (2) refrigerant lines
connected to the receiver and unscrew the receiver
from the weld nut holding the receiver and the removal
of the upper strap through the removal of the nut.
The receiver is now removable.
E) Dehydrator (Drier) - The drier can be removed and re-
placed through the unbrazing of both sides of the drier
and replacement with another drier.
54
