TM 55-1930-209-14&P-18
Section IV. REMARKS
Reference
Code
Remarks
AP
Service by cleaning impeller, exterior of motor, air intake, and exit and lubricate motor.
AQ
Repair limited to removal and replacement of corrugated metal hoses, silencers, and muffler.
AR
Check and replace fluids for two winch shaft bearings and main winch reduction gear.
AS
Use repair kit to fix cuts and gouges in 2,500-foot pipe.
AT
Service by keeping unit clean, especially suction strainer and electric motor.
AU
Service by lubricating electric motor and gear pump.
AV
Repair by changing section and return filters.
AW
Repair by replacing hydraulic hoses or fittings.
AX
Repair by replacing gear pump coupling, replacing counterbalance valve cartridge, repairing gear pump,
repairing motor/heater control, replacing hand pump seal.
AY
Service by cleaning unit and lubricating reductions and levelwind traveller head.
AZ
Repair of primary or secondary reduction, levelwind coupling, or levelwind motor.
BA
Repair by replacement of grinding wheel.
BB
Service by lubricating quill and pinion gear occasionally with medium oil, spindle return clock spring
twice a year with light machine oil, raising support collar with medium oil, and spindle splines every 3
months with gear oil.
BC
Repair by replacing variable speed belt.
BD
Periodically remove dirt, dust, and lint from condenser. All moving parts have an adequate supply of
oil within their housings and generally require no additional lubrication during the life of the unit.
BE
Repair by replacing hose, filter-drier, and refrigerant.
BF
Service by weekly cleaning of filters, yearly lubrication of motor, and changing light bulb when
required.
BG
Service by cleaning condenser, water regulating valve strainer screen, drain strainer, and exterior of
unit. Lubricate binding parts in water regulating valve with tasteless grease.
BH
Adjust waterflow or temperature.
BI
Repair by replacement of fuse only.
B-63
