TM 55-1930-209-14&P-19
Table 17-4. Preventive Maintenance Checks and Services
for Workboat, Lifesaving, and Firefighting Equipment System (Continued)
B -
Before
D -
Daily
Q - Quarterly
D -
During
W -
Weekly
S - Semiannually
A -
After
M -
Monthly
A - Annually
INTERVAL
ITEM
PROCEDURES
EQUIPMENT
ITEM
TO BE
CHECK FOR AND HAVE
IS NOT READY/
NO.
INSPECTED
REPAIRED OR ADJUSTED
AVAILABLE IF
B D A D W M Q S A
AS NECESSARY
c. Check that all hoses and fittings are
Hoses worn or
undamaged and not excessively worn.
damaged.
Replace as required.
d. Check battery connections.make sure
Battery is cracked
cables are securely fastened and free of
or damaged.
corrosion. Clean as necessary and coat
with protective grease.
e. Check that engine exhaust hose and
Exhaust hose
gaskets are tight and properly sealed.
leaks.
Check for leaks. Tighten, replace or
repair as necessary.
f. Flush pump assembly with clean, fresh
water.
·
g. Drain and thoroughly dry all hoses, pipes,
and valves.
h. Check for rust and corrosion.
Touch up
paint in accordance with TB 43-0144 as
necessary. Do not paint threads or
labels.
i. Inspect pump assembly set for visible
deficiencies that, if not corrected, could
become hazardous to people or equip-
ment.
WARNING
Do NOT operate pump in closed area with-
out exhaust hose connected and routed
safely to outside fresh air. Exhaust gases
are hazardous to personnel.
j. Make sure engine exhaust hose and gas-
Exhaust hose
kets are tight and sealed properly with no
leaks.
leaks.
17-35
