Introduction
This Service Manual is a step-by-step guide designed
for the customer or shop mechanic who is servicing or
repairing a particular model of Torque-Hub Final Drive.
(The model covered by this copy of the Manual is
specified on the Manual cover.)
Included are -
1. assembly and exploded view drawings
2. disassembly procedure
3. main assembly procedure (assuming all sub-
assemblies to be intact)
4. sub-assembly procedures.
At the time of printing, this Manual was complete for the
specific Torque-Hub model designated. However,
Fairfield Manufacturing Co., Inc., reserves the right to
update and improve its products at any time. All
specifications and procedures are therefore subject to
change without notice.
Safety
Standard safety practices should be followed during the
disassembly and assembly procedures described. Safety
glasses and safety shoes should be worn; heavy, heat resistant
gloves should be used when heated components are handled.
Be especially alert when you see a caution symbol (
). This
symbol indicates that a particular operation could cause
personal injury if not performed properly or if certain safety
procedures are not followed.
