DECKMASTER
GEAR SET SPECIFICATIONS
PINION GEAR
Pitch-3 DP 200PA Stub Tooth, with long Addendum.
No. of teeth - 15
Pitch Diameter - 5"
Face Width - 4"
Material 4140 H.T. To Rockwell (C) 32 to 35 with teeth flame
hardened after cutting to approximately 50 R (c).
Internal Spline - 8/16 D.P., 30° P.A., 23 tooth, Side Fit
RING GEAR
Pitch - 3 DP, 20° P.A. Stub Tooth, with short addendum.
No. of teeth - 181
Pitch diameter - 60.333"
Face Width - 4"
Material 4140 H.T. to Rockwell (c) 32 to 35 (No flame harden)
Ratio of pair - 12.666 to 1
Center distance - -32.666"
