TESTING AND ADJUSTING
BRACKET ASSEMBLY INSTALLED
2. 5P4814 Collet. 3. Bracket assembly.
COVER REMOVED
4. Slot on fuel rack.
BRACKET ASSEMBLY
5.
Lever. 6. Shaft.
4.
Put 9S229 Contact Point, 9.7 mm (.38 in.) long on 6V3075 Dial Indicator (7) and install dial indicator in collet (2).
5.
Remove air fuel ratio control (8) from the rear of the governor housing.
6.
Remove plug (9) from the rear of the governor housing.
55
