TM 55-2090-201-14&P
3-33. VESSEL SUB-ASSEMBLY, TYPE A AND B SEPARATOR (Continued).
LOCATION
ITEM
ACTION
REMARKS
Repair
a. Weld cracked or broken
welds.
Chase damaged
threads.
b. Replace sub-assembly with
a serviceable-like item if
damaged beyond repair.
Installation
17.
Separator a.
Install sight glass (9) and
sub-assem-
filter support (8).
bly reas-
sembly
It is important that the filter element be handled
properly.
DO NOT touch or handle the sock area
(side covering) of the elements.
Contamination of
this surface by skin oils may prevent the coalescer
element from functioning properly and cause foaming
of the effluent.
b.
Install filter element (7).
c. Install hold-down plate (6).
NOTE
Center hold-down plate over the end cap of the filter
element.
d. Install O-Ring (5), O-Ring
retainer (4) and wing nut
(3). Tighten wing nut by
hand.
DO NOT use a wrench to tighten the wing nut, or the
filter element may be damaged.
3-202
